Double-sided adhesive dots 100x Nitto 5790 D29mm

100 pieces of Nitto 5790 foam adhesive dots with a diameter of 29mm

These adhesive dots can easily be cut to the size you want with standard scissors.

Description:

• based on a cross-linked polyolefin foam.
• they are coated with a pressure-sensitive adhesive that offers excellent adhesive properties, especially on surfaces with low energies
• dampens vibrations and noises
• seals components
• simple application and optimal use of the adhesive surfaces
• excellent holding properties
• excellent resistance to restoring forces
• good shock absorption
• adhesion to several materials (especially polyolefins)
• compensates surface irregularities
• RoHS Compliant

Adhesive dots / adhesive pads functions:

• handicrafts
• bonding of emblems
• gluing mirrors
• fixing indoors and outdoors
• modelling
• excellent holding properties
• excellent resistance to restoring forces
• good shock absorption
• adhesion to a variety of materials
• compensates surface irregularities
• sound insulation and sealing properties

The initial adhesive strength increases over time, so that a permanently reliable bond is achieved. To achieve optimal adhesion, the surfaces must be clean, dry, and as smooth as possible, as well as showing a good fit to one another. Full-surface contact, which can be promoted by pressure, is decisive for the build-up of adhesive strength. In practice, a pressure of approx. 10 to 50 N / cm² is often required. Bonding should take place at a temperature of 18 ° C to 40 ° C. All joining partners and the adhesive dots should have the same temperature as possible during processing.

These are production-related end pieces. Therefore, the adhesive dots are only available in limited numbers and are no longer available after they have been sold.