Double-sided adhesive dots 3M 5673P D20mm 100 pieces

3M 5673P double-sided adhesive dots

• Diameter: 20mm
• Quantity: 100 pieces
• Thickness: 1.1mm

These adhesive dots can easily be cut to the size you want with standard scissors.

Description:

• 5673 is a 3M Acrylic Foam tape made of a gray acrylate foam, which is equipped on one side with a special adhesive for low-energy surfaces
• It enables attachments, such as emblems and decorative strips, to be attached to low-energy surfaces, especially polypropylene, without pre-treatment
• 5673P is characterized by good internal strength, excellent long-term stability, and very good adaptability to the surfaces to be bonded
• A special ability is to relieve tension in the adhesive seam, which leads to an extremely adhesive connection
• Due to the protective cover used, 5673P is especially suitable for processing in stamping processes

Adhesive dots / adhesive pads functions:

• handicrafts
• bonding of emblems
• gluing mirrors
• fixing indoors and outdoors
• modelling
• excellent holding properties
• excellent resistance to restoring forces
• good shock absorption
• adhesion to a variety of materials
• compensates for surface irregularities
• sound insulation and sealing properties

The initial adhesive strength increases over time, so that a permanently reliable bond is achieved. To achieve optimal adhesion, the surfaces must be clean, dry and as smooth as possible, as well as showing a good fit to one another. Full-surface contact, which can be promoted by pressure, is decisive for the build-up of adhesive strength. In practice, a pressure of approx. 10 to 50 N / cm² is often required. Bonding should take place at a temperature of 18 ° C to 40 ° C. All parts to be joined and the adhesive tape should have the same temperature as possible during processing.

These are production-related end pieces. Therefore, the adhesive dots are only available in limited numbers and are no longer available after they have been sold.